Serving the Lafayette area  ·  (337) 294-0108  ·  Open Mon-Sun 7am-7pm
📞 (337) 294-0108 Free Quote

Metal Roofing in Erath, LA (70533) · Local Professionals

Lafayette Metal Roofing · Fast response in Erath and the Lafayette area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+338Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Erath is a small town where the prairie meets the bayou, and the roofs here take a beating. Most homes sit on generous lots under live oaks and pecans, with a mix of older Acadian cottages, brick ranches, and newer builds off Veterans Memorial Drive and along the stretch toward Delcambre. The flat ground and heavy clay soil mean water has nowhere to go fast, and the summer storms come down hard.

We are Lafayette Metal Roofing, and we have been putting metal roofs on homes and shops across Vermilion Parish for years. When a squall line rolls through and you hear a panel rattling or find a wet spot on the ceiling, you want a roofer who knows the difference between a quick patch and a proper fix. That is what we do. Call us at (337) 294-0108 for a free look.

Metal Roofing in Erath (70533)

Erath sits low and flat, and that shapes every roofing job we do here. The soil is heavy clay, so after a heavy rain the ground stays soft, and we have to be careful with ladders and staging. Many homes have mature oaks and pecans close to the house, which means debris loads on the roof and the occasional limb puncture. The wind off the Gulf is steady, and during hurricane season it gets serious. We see a lot of failed fasteners and lifted panels on older metal roofs, especially on the west and south slopes. The housing stock runs from older cottages with steep hipped roofs to brick ranches with low slopes, and each one needs a different approach. On the low-slope ranches, we often recommend a standing seam or a mechanical seam panel that handles ponding better. On the older homes, we match the profile to the house, whether that is 5V-crimp or a metal shingle that looks like the original tin.

Our team has worked on roofs from the edge of town near the rice fields to the newer subdivisions off Highway 14. We know how to coordinate with the local building department and how to keep a job site safe when the ground is wet and the trees are close.

Our services in Erath

How a Job Works in Erath

Step 1: You call us at (337) 294-0108 or fill out the form, and we set up a free on-site assessment. We walk the roof, check the attic if accessible, and look at the flashing, fasteners, and panels. We give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the permit if needed and schedule the work. In Erath, tight lots and mature trees can mean we need to bring a smaller trailer or use a lift instead of a truck-mounted conveyor. We work around your schedule and keep the noise down where we can.

Step 3: When the job is done, we clean up every nail and scrap, and we walk the roof with you to make sure you are satisfied. We do not leave until you have a clear understanding of what was done and how to care for your new roof.

Pricing for metal roofing in Erath depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical ranch home, metal roof installation starts around $8 per square foot, and standing seam runs about $10 per square foot. If you are replacing an old roof, that starts around $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Repairs are often in the $450 range for a leak, and screw replacement or re-fastening starts at $750. We also offer free estimates, so you can get a real number for your house. Call (337) 294-0108 to set one up.

My house is near the Erath City Park and has a steep roof with big oaks hanging over it. Can you install a metal roof without damaging the trees?
Yes. We work carefully around mature trees and can use protective barriers and smaller equipment to avoid damage. We also recommend trimming back limbs that rub the roof, since that is a common cause of wear and debris buildup in Erath.
How quickly can you respond after a storm knocks panels loose in Erath?
We prioritize storm damage calls in Erath and the surrounding area. Call us at (337) 294-0108, and we will schedule an inspection as soon as possible, often within a day or two depending on the volume of calls. We can tarp or secure the roof if needed to prevent further water damage.
What is the typical cost to replace a metal roof on a 1,500 square foot house in Erath?
For a 1,500 square foot roof, a basic metal roof replacement might start around $9 per square foot, so roughly $13,500, but the exact price depends on the material, pitch, and condition of the existing roof. We provide a free estimate so you know the real number for your home.
Do I need a permit to replace my roof in Erath, and how do I get one?
Yes, the Town of Erath typically requires a permit for a full roof replacement. Requirements can vary, so we recommend checking with the town hall or building department. We can help guide you through the process and often handle the paperwork for you.
My neighbor's oak tree drops limbs on my roof. What are my options if my HOA has rules about roof color?
We can help you choose a metal roof color that meets HOA guidelines and looks good on your home. As for the tree, property line issues are usually a civil matter, but we can trim back limbs over your roof with your neighbor's permission to reduce debris.
Are you insured for roofing work in Erath, and what does that cover?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property in case of an accident on the job. We are happy to provide proof of insurance upon request.
What maintenance does a metal roof need in Erath's humid climate?
In Erath, we recommend an annual inspection to check for loose fasteners, debris buildup, and any signs of rust or sealant wear. After storm season, a quick look at the panels and flashing can catch small issues before they become leaks. We offer maintenance plans and free estimates for inspections.
Why choose us?

Trusted professionals in Lafayette

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lafayette

All your work handled by qualified professionals in Lafayette

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

338+ Verified Client Reviews in Lafayette

⭐⭐⭐⭐⭐ 4.9/5 · 338 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lafayette · Response within 24h · No commitment · ☎ (337) 294-0108

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lafayette ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm