Serving the Lafayette area  ·  (337) 294-0108  ·  Open Mon-Sun 7am-7pm
📞 (337) 294-0108 Free Quote

Metal Roofing in Rayne, LA (70578) · Local Professionals

Lafayette Metal Roofing · Fast response in Rayne and the Lafayette area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+338Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rayne, Louisiana, the Frog Capital of the World, sits right on the prairie in Acadia Parish, where the housing stock tells the story of rice farms, rail lines, and families who have been here for generations. You will find older Acadian cottages and brick ranches with low shingle roofs that have taken a beating from hurricane seasons, along with a growing number of metal roofs on homes and agricultural buildings. The flat terrain and heavy clay soil mean drainage and wind uplift are real concerns, and the huge live oaks and pecan trees drop limbs that can puncture even the toughest roof.

Homeowners in the 70578 ZIP code call Lafayette Metal Roofing because we understand the specific challenges of roofing in Rayne. We know the older homes near the Frog Festival grounds and the commercial buildings along North Adams Avenue, and we have seen how repeated storms test every roof. Our team provides honest assessments and quality metal roofing solutions that stand up to Acadiana weather.

Metal Roofing in Rayne (70578)

Rayne's terrain is flat prairie with heavy clay soil, which means water tends to pool rather than drain quickly. That makes proper flashing and gutter systems critical, especially on older homes with pier-and-beam foundations or low-slope roofs. Many properties here have mature trees, and the debris from live oaks and pecans can clog gutters and trap moisture against roof panels. We also see a lot of agricultural and commercial buildings, like rice dryers and equipment sheds, that need durable metal roofing to protect equipment and stored grain. The intense summer heat and UV, combined with salt-tinged air from the Gulf, can degrade cheaper roofing materials quickly, so we recommend coatings and finishes that are made for this climate.

Our team has worked throughout Lafayette and the surrounding areas, including Rayne, Crowley, and Duson. We understand the local building department requirements and can help you navigate permits for a full replacement or re-roof. Whether you need a new standing seam roof on a home or a retrofit over existing shingles on a barn, we have the experience to do it right.

Our services in Rayne

How a Job Works in Rayne

Step 1: Give us a call at (337) 294-0108 to schedule a free on-site assessment. We will inspect your current roof, check for leaks or damage, and discuss your options. We will also review your insurance claim documentation if you have storm damage, though coverage is always determined by your insurer.

Step 2: Once you approve the estimate, we will order materials and schedule the work. For homes in Rayne, we often need to coordinate with the local building department for permits. If your property is in a historic district or has HOA restrictions, we will help you choose a panel profile and color that meets the guidelines. We also plan for tight lot access and protect your landscaping during the job.

Step 3: After installation, we clean up thoroughly and walk through the finished roof with you. We make sure you are satisfied and that all debris is removed. We leave your property clean and your roof ready for whatever Acadiana weather brings.

Pricing for metal roofing in Rayne depends on the size of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, the cost starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For agricultural buildings, we offer free estimates. The best way to get an accurate price is to call us at (337) 294-0108 for a free estimate. We will assess your specific roof and give you a clear, written quote.

My house near the Frog Festival grounds has a steep hipped roof with original tin. Can you match the look with a modern metal roof?
Yes, we can match the profile and color of your original tin roof with modern standing seam or corrugated panels. Many older homes in Rayne have unique architectural details, and we take care to preserve the character while upgrading to a weather-tight, energy-efficient metal roof. We will bring samples so you can see the options.
A storm just blew through Rayne and lifted some panels on my barn. How quickly can you respond?
We prioritize storm damage calls. Call us at (337) 294-0108 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can make temporary repairs to prevent further damage and then provide a permanent fix. We also document the damage for your insurance claim.
What is the typical cost to replace a shingle roof with metal on a 2,000 square foot home in Rayne?
For a 2,000 square foot home, a basic metal roof replacement might range from $14,000 to $20,000, depending on the material and roof complexity. Standing seam would be at the higher end. We recommend a free estimate at (337) 294-0108 for a precise figure based on your roof.
Do I need a permit from the City of Rayne to install a metal roof?
Yes, roofing permits are commonly required for a full replacement or re-roof in Rayne. The exact requirements and fees vary, so we always check with the local building department before starting work. We handle the permit process for you and ensure all inspections are passed.
My neighbor's tree hangs over my property line and drops limbs on my roof. Who is responsible for trimming it?
In Louisiana, property owners have the right to trim branches that overhang their property line, but you should check local ordinances and possibly consult with your neighbor first. If a limb falls and damages your roof, your insurance may cover it. We can help document the damage and repair your roof.
Are you fully insured for roofing work in Rayne?
Yes, Lafayette Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Rayne's humid climate?
We recommend an inspection every two to three years, especially after major storms. The humidity and UV can cause fasteners to loosen and seals to degrade. A regular inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Lafayette

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lafayette

All your work handled by qualified professionals in Lafayette

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

338+ Verified Client Reviews in Lafayette

⭐⭐⭐⭐⭐ 4.9/5 · 338 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lafayette · Response within 24h · No commitment · ☎ (337) 294-0108

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lafayette ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm