Serving the Lafayette area  ·  (337) 294-0108  ·  Open Mon-Sun 7am-7pm
📞 (337) 294-0108 Free Quote

Metal Roofing in Scott, LA (70583) · Local Professionals

Lafayette Metal Roofing · Fast response in Scott and the Lafayette area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+338Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Scott, Louisiana, is a town where the old and the new sit side by side, from the brick ranches built in the 1970s and 80s off Cameron Street to the newer subdivisions popping up along Apollo Road. The flat prairie land and heavy clay soil mean water has nowhere to go, so your roof has to shed it fast and stand up to everything the Gulf throws at us.

That's why homeowners in Scott (70583) call Lafayette Metal Roofing. We know the sun-baked shingles on these older homes and the wind-driven rain that finds every gap. Whether you're near Scott Middle School or out toward the rice fields, we've got the metal roofing solution that fits your property and your budget.

Metal Roofing in Scott (70583)

Scott sits on flat ground with heavy clay soil, which means drainage is always a concern. When we install a metal roof here, we pay close attention to how water will run off and where it will go, especially on the low-slope roofs common on the brick ranches and split-levels from the 1970s and 80s. Many of these homes have shingles that have taken decades of UV and humidity, and some have already been re-roofed once. We can often install a metal roof over the existing shingles (retrofit) if the deck is sound and the code allows it, saving you time and money. For newer homes in subdivisions like those off Rue de Belier, we make sure the panel profile and color meet any HOA requirements. The intense summer heat and occasional hail mean we choose fasteners and finishes that hold up. Our team has been serving Scott and the surrounding Lafayette area for years, and we understand the specific challenges of roofing in Acadiana.

We've worked on everything from small carports to large agricultural buildings, and we bring that experience to every Scott home.

Our services in Scott

How a Job Works in Scott

Step 1: Give us a call at (337) 294-0108 or request a free estimate online. We'll schedule a time to come out and inspect your roof, discuss your options, and answer any questions. We'll provide a written estimate before any work begins.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. In Scott, we coordinate with the local building department for permits, which are typically required for a full replacement. If you live in a subdivision with an HOA, we'll help you get the necessary approval for your metal roof. Our crew is efficient and respectful of your property, and we'll keep you informed throughout the process.

Step 3: After the installation, we do a thorough cleanup, including magnet sweeping for nails and debris. We'll walk the job with you to make sure you're satisfied and answer any final questions. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Scott depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof over shingles (retrofit) at $7. For repairs, common fixes like leak repair start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect. Call us at (337) 294-0108 to schedule yours.

My brick ranch off Cameron Street has the original shingles from the 1980s. Can you install a metal roof over them?
In many cases, yes. If your roof deck is in good shape and the existing shingles are not too deteriorated, we can often install a metal roof over them using a retrofit system. This saves you the cost and mess of tearing off the old shingles. However, local building codes limit the number of layers, so we'll check that during our free inspection. We'll also make sure the added weight is not an issue, though metal is typically lighter than asphalt shingles.
A storm just blew through Scott and lifted some panels on my roof. Can you fix it quickly?
Yes, we offer storm and wind damage repair with free inspections. Call us at (337) 294-0108 and we'll get out there as soon as possible to assess the damage and make temporary or permanent repairs. We work with your insurance company to document the damage and provide the necessary paperwork. We know how stressful storm damage can be, and we're here to help.
What's the typical cost for a metal roof on a 2,000 square foot home in Scott?
For a 2,000 square foot home, a basic corrugated or ribbed panel roof might start around $11,000 (at $5.50 per square foot), while a standing seam roof could start around $20,000 (at $10 per square foot). These are rough estimates and actual costs depend on roof complexity, pitch, and material. We provide free estimates so you can get an accurate number for your specific home.
Do I need a permit for a metal roof replacement in Scott?
Yes, the City of Scott typically requires a permit for a full roof replacement. The exact requirements and fees can vary, so we always recommend checking with the local building department. As part of our service, we can handle the permitting process for you, ensuring that the work meets all local codes and inspections.
My HOA has strict rules about roof color. Can you help with that?
Absolutely. Many subdivisions in Scott have architectural review boards or HOA guidelines that specify acceptable roof colors and materials. We can provide samples and documentation to help you get approval. If you're unsure about the rules, we can help you navigate the process. We want your new roof to look great and comply with all neighborhood standards.
Are you fully insured for roofing work in Scott?
Yes, Lafayette Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance. This protects you and your property in the unlikely event of an accident.
What should I do to maintain my metal roof in Scott's humid climate?
In our humid climate, it's a good idea to inspect your metal roof annually, especially after storm season. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of rust or corrosion. We offer maintenance inspections and can replace screws and re-fasten panels as needed. Keeping your roof clean and free of debris will help it last longer.
Why choose us?

Trusted professionals in Lafayette

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lafayette

All your work handled by qualified professionals in Lafayette

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

338+ Verified Client Reviews in Lafayette

⭐⭐⭐⭐⭐ 4.9/5 · 338 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lafayette · Response within 24h · No commitment · ☎ (337) 294-0108

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lafayette ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm