Serving the Lafayette area  ·  (337) 294-0108  ·  Open Mon-Sun 7am-7pm
📞 (337) 294-0108 Free Quote

Metal Roofing in New Iberia, LA (70560) · Local Professionals

Lafayette Metal Roofing · Fast response in New Iberia and the Lafayette area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+338Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

New Iberia is a city where the past and present share the same roofline. From the historic cottages along Bayou Teche to the brick ranches tucked under live oaks in neighborhoods like Spanish Lake and the streets near New Iberia High, the housing stock spans nearly two centuries, and each roof has its own story.

Homeowners in 70560 call Lafayette Metal Roofing because we understand the unique demands of roofing here: hurricane winds, heavy humidity, and debris from the oaks and pecans that shade so many yards.

Metal Roofing in New Iberia (70560)

New Iberia sits on the flat Vermilion River prairie, where heavy clay soil and bayou lowlands can make proper drainage and roof pitch critical. The city's historic homes often have steep hipped and gabled roofs with deep galleries, requiring careful flashing and attention to architectural detail. In newer subdivisions, low-slope shingle roofs are common, and metal roofing offers a durable upgrade that can handle the intense summer heat and torrential afternoon downpours. Many properties have large live oaks and pecans that drop limbs and leaves, so we often recommend impact-resistant panels and proper debris management. Access can be tight in older neighborhoods with narrow streets and mature landscaping, so we plan each job with that in mind.

Our team has worked throughout New Iberia and the surrounding areas, from the historic district to the newer developments off Highway 90. We have seen firsthand how salt-tinged air and hurricane seasons take a toll on roofs, and we use that experience to recommend the right metal roofing system for your property.

Our services in New Iberia

How a Job Works in New Iberia

Step 1: It starts with a free on-site assessment. We will come out to your New Iberia property, inspect the roof, discuss your needs, and provide a detailed estimate. We will also check for any signs of storm damage or wear that might affect the installation.

Step 2: Once you approve the estimate, we schedule the work. In New Iberia, we coordinate with the local building department for permits, which are typically required for a full replacement. For historic homes, we can help navigate design review if needed. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails, and walk you through the finished roof. We leave your property clean and your roof ready to protect your home for decades.

Pricing for metal roofing in New Iberia varies based on the size of your roof, its complexity, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are considering going over existing shingles, retrofit starts at $7 per square foot, but keep in mind that local codes limit the number of layers allowed. Repairs are often more affordable, with leak repairs starting at $450 and screw replacement at $750. For a precise estimate tailored to your New Iberia home, call us at (337) 294-0108. We offer free inspections and estimates, so you can plan with confidence.

Do you work on historic homes in New Iberia, like those in the Bayou Teche district?
Yes, we have experience with the unique roofing needs of historic properties. Homes in New Iberia's historic districts often have complex roof lines, original architectural details, and may require special considerations for materials and colors. We can help you choose a metal roofing system that complements the historic character while providing modern durability, and we can guide you through any design review requirements.
How quickly can you respond to storm damage in New Iberia?
We prioritize storm damage calls and aim to respond as quickly as possible. For emergencies like active leaks or wind damage, call us at (337) 294-0108. We offer free inspections and can provide temporary repairs if needed to prevent further damage, then schedule a permanent fix.
What is the typical cost for a metal roof replacement on a 2,000-square-foot home in New Iberia?
For a 2,000-square-foot home, a metal roof replacement typically ranges from $18,000 to $25,000, depending on the material, roof pitch, and complexity. Standing seam or stone-coated steel may be at the higher end. We provide free estimates to give you an accurate figure based on your specific property.
Do I need a permit for a metal roof in New Iberia, and how do I get one?
Yes, a permit is generally required for a full roof replacement in New Iberia. The City of New Iberia's building department handles permits, and requirements can vary based on the scope of work. We handle the permitting process for you, ensuring all inspections and regulations are met.
My neighbor's tree hangs over my roof. What are my options if it damages my metal roof?
If a neighbor's tree causes damage, it's best to discuss it with them first. In Louisiana, property owners are generally responsible for maintaining their trees, but liability can depend on whether they knew about a hazard. We can repair the damage and provide documentation for insurance claims. For preventative measures, we can install snow guards or branch guards to reduce debris impact.
Are you fully insured for work in New Iberia?
Yes, we are fully insured with both general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the job. We can provide proof of insurance upon request.
How often should I inspect my metal roof in New Iberia's climate?
Given the heavy rainfall, humidity, and storm potential, we recommend an annual inspection, especially after hurricane season. Look for loose fasteners, debris accumulation, and signs of leaks. We offer free inspections to catch small issues before they become major problems.
Why choose us?

Trusted professionals in Lafayette

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lafayette

All your work handled by qualified professionals in Lafayette

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

338+ Verified Client Reviews in Lafayette

⭐⭐⭐⭐⭐ 4.9/5 · 338 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lafayette · Response within 24h · No commitment · ☎ (337) 294-0108

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lafayette ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm